| Customization: | Available |
|---|---|
| Type: | Medical Pendant |
| Kind: | Medical Pendant |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Features:
Requirements for dry wet separation configuration:
1. Both the dry zone box type and wet zone box type have the same brand gas terminal standard configuration: 1 oxygen each, 1 negative pressure suction each, and 1 compressed air each. The terminal system is optional; Standard factory quick plug; Optional negative pressure suction device and oxygen inhaler; Optional LED auxiliary lighting;
2. Standard configuration of same brand gas terminal quick plug;
3. Power sockets: 6 in dry and wet areas, 220V, 10A (compatible with international standard plugs);
4. Grounding terminals: 2 for dry and wet areas respectively; RJ45 network interface: 1 each;
5. One set of adjustable rotating infusion stand is configured in the wet area, fixed on the stainless steel rod outside the box, which can move up and down freely and adjust the height freely.
6. Product configuration: 1 stainless steel mesh basket, which can hold instruments;
7. The configuration can be upgraded according to customer requirements, with a suspended ceiling installation that is sturdy and reliable;
1. Working power supply: AC220V,50Hz; Input power: 6KVA;
2. The bridge length is 2000-3000mm (actual size subject to on-site measurement by the user); The thickness of the main profile of the bridge body is ≥ 18mm. In order to ensure the load-bearing capacity of the product, the thickness of the suspension pipe connection of the bridge body is ≥ 34mm;
3. Configure 2 environmental lighting fixtures, with optional LED auxiliary lighting fixtures with independent suspension arm system. The number of LED beads should be ≥ 28, the lamp head diameter should be ≤ 20cm, and the illumination should be ≥ 35000 LUX;
4. Wet section tower: 1 unit, box type upper and lower electrical separation, using imported linear guide rails, with a center distance of 190mm between the two rails, and an overall length of ≥ 600mm for the guide rails. The tower body can move left and right for a distance of ≥ 500mm.
5. Dry section tower: 1 unit, box type upper and lower electrical separation, using imported linear guide rails, with a center distance of 190mm between the two rails, and an overall length of ≥ 600mm for the guide rails. The tower body can move left and right for a distance of ≥ 500mm.
){kind=link}